ELITIST S
よくある質問
Our handle uses This is the button form of the switch handle, so the ABXY button is the opposite of the switch handle; the handle adds a silk screen next to the ABXY button, marking the same button layout as the XBOX handle
Android platform does not support vibration of universal controllers, all controllers are the same
Turn off the handle and turn on the joystick without touching the joystick. Rotate the joystick for a few seconds
The computer and switch support 2P at the same time; the mobile phone cannot be connected to multiple controllers at the same time
The game supports universal controller, our controller can support
Press and hold the "-" and "+" keys of the handle at the same time for 5 seconds, the handle will switch to DINPUT mode, and the first indicator light will always be blue , And then see if it can be controlled
Wired and 2.4G connection can be connected to the system based on Android box
It is recommended to use the receiver to connect. Insert the USB receiver into the USB port of the computer. Press and hold the pairing button of the handle until the indicator light of the handle flashes quickly. Wait for the pairing. After the pairing is successful, the first light will be steady green. Bright
Yes, ensure that when the vibration and gyroscope functions in the switch game are turned on, the native controller will have functions in the game, and our controller will also stand by
Yes, it supports three-speed vibration intensity adjustment
Currently only the Android Bluetooth platform supports one-click screenshot and volume control, and the firmware will be upgraded to support this function in the future;
Currently on win10, you can press the HOME button to enter the XBOX game bar to take screenshots and control
1. Confirm whether the game supports vibration
2: If the vibration function turned off
Check if the user has connected to other devices before, if so, disconnect and then pair and connec
Method https://jingyan.baidu.com/article/a378c960df9a0db3282830d1.html
1: Unplug the receiver from the USB port of the computer, and press the PAIR button or the HOEM button on the handle to shut down
2: Re-insert the receiver into the USB port of the computer, press and hold the PAIR button, and the indicator light will flash quickly to enter the pairing state, and pair it again
1: Go to the main switch interface, click on the handle-change grip/sequence in turn to enter the pairing interface, and the handle will automatically shut down at this time
2: Return the host to the main interface, click the sleep mode, and put the switch into the sleep state
3: Connect to a new device according to the connection method of the respective device